Thermic Fluid Oil Boiler
Thermal Oil Boiler Price
Features
• Application for all industries, such as chemical/petroleum/wood processing industry etc.
• Fuel: Diesel, Light oil
• Rated thermal power: 7MW-14MW(9300HP-18600HP)
• Rated Work Pressure: 8bar-10bar(116psi-145psi)
• Rated outlet oil temperature: 320℃
• Core Control Mode：PLC control, PLC+PC control, DCS control
• Thermal Efficiency(%)：＞92%
Promise
Introduction
Reviews
Thermic Fluid Oil Boiler Overview
The thermic fluid oil boiler is a boiler that uses an organic heat carrier as a heat medium for heat transfer. Utilizing the high-temperature characteristics of the organic heat carrier, the thermic fluid oil boiler can realize low-pressure and high-temperature heating to supply. The boiler adopts an injection-type forced circulation system, and the heat exchange surface adopts square and circular tube structures. The thermal oil boiler price is a little high, because it is large capacity from 7MW to 14MW. Most thermal oil boiler manufacturers cannot produce the large capacity thermic fluid oil boiler, but we can. If you need this one,we can provide you in best price. It widely is used in the petroleum, chemical industry, chemical fiber, pharmaceutical, textile printing and dyeing, light industry, building materials, wood processing, food, road construction asphalt heating, and other industrial fields that require high temperature heating.
Thermic Fluid Oil Boiler Boiler Body Structure
YYL series thermic fluid oil boiler adopts 3-trips round coil tube structure. The coil tube end adopts beam port to effectively protect the furnace wall at boiler end, is equipped with advanced combustion device, and with fully automatic operation. After fuel ignition from burner, it forms a flame full fill into the round furnace tube, and through the furnace tube wall, the heat is transferred by radiation, which is the first trip. The high temperature flue gas after combustion gathers at rear furnace door and then turns into the second trip which is convection tube area. The flue gas temperature is going lower. After convection heat exchange, comes to front furnace door, and from here it turns into the third trip entering into tube bank area, then through economizer it is emitted into atmosphere through chimney. The thermic fluid oil boiler is delivered in one whole body and after erection at site, it only needs to connect thermal oil piping and electricity to start operation. The thermic fluid oil boiler has 4 heating areas: furnace radiation heating area, the first convection tube heating area, the second convection tube heating area and economizer (waste heat boiler).
Thermic Fluid Oil Boiler Parameter
| Model | YY(Q)L-7000 | YY(Q)L-8200 | YY(Q)L-9400 | YY(Q)L-10500 | YY(Q)L-12000 | YY(Q)L-14000 |
| Rated thermal power/MW | 7 | 8.2 | 9.4 | 10.5 | 12 | 14 |
| Rated thermal power/x104kcal/h | 600 | 700 | 800 | 900 | 1000 | 1200 |
| Rated outlet oil temperature/℃ | 320 | |||||
| Rated working pressure/Bar | 8 | 8 | 10 | 10 | 10 | 10 |
| Heat efficiency（≥％） | 92 | |||||
| System installed capacity/kW | 140 | 140 | 200 | 200 | 240 | 300 |
| Max Transportation size:L×W×H(m) | 8.0x3.55x3.95 | 8.5x3.65x4.0 | 9.5x3.8x4.0 | 10.5x3.8x4.0 | 12.35x3.8x4.0 | 13.5x4.0x4.2 |
| Max Transportation Weight( t ) | 28.5 | 33 | 39 | 55 | 60 | 65 |
| Note: Parameter is for reference only, if any changes should follow the factory technical data. | ||||||
Thermic Fluid Oil Boiler Composition of Boiler System
Combustion system, Steam water system, Control system
· Combustion system
The combustion system supplies fuel to the boiler for heat generation.
Hot oil boilers' combustion system equips with a burner and fuel device according to the fuel properties, thermal oil capacity, and pressure of the boiler.
Burner brands: Baltur, Riello, Weishaupt, Hofamat, Honeywell, Ecoflam, Cavallo, and so on.
· Medium oil system
The medium oil system consists of injecting the oil part and circulating the oil part.
The injecting oil part: injecting oil refers to medium oil that is provided to the boiler for hot oil conversion. The injecting oil channels oil into the boiler and automatically controls it to satisfy make-up oil requirements for the system. Such as due to the high temperature oil expansion in the system, or boiler blow-down, the whole system needs fresh thermal oil to inject.
The circulating oil part: the circulating oil is part of the boiler responsible for collecting and regulating the high temperature oil generated by the boiler. Valves and pressure gauge controls are used to monitor and regulate temperature and pressure.
· Control system
The thermic oil boiler control system is a collection of boiler electrical control components, a center for collecting and processing boiler operating signals, and an operation platform for sending execution instructions to each execution unit of the boiler.
CN Boiler has always adhered to the concept of electrical full integration in the industrial energy industry, that is, integrating strong and weak current systems such as boiler control, boiler room auxiliary machine control, upper monitoring system, and boiler room power distribution system into a complete electrical package, forming a characteristic industrial energy control system (CN Boiler Multi-Boiler Control System, referred to as CN Boiler- MBCS). The control system is shown as follow：
Types of control cabinets for thermic oil boilers: wall-mounted control cabinet, podium control cabinet, MCC vertical control cabinet, piano-style control cabinet, positive pressure explosion-proof control cabinets, and three-proof control cabinet. Each control cabinet we leave the factory has a unique number, and it has the function of mobile phone viewing. You can see the operating status of the boiler in real-time, such as temperature, water level, pressure, alarm record, etc. But the actual operation still needs to be completed by the staff in the boiler room.
Company profile
CN BOILER ENGINEERING SOLUTION LLC is a comprehensive service provider of thermal energy systems in China, devoted to providing customers with one-step thermal energy system solutions by safe, save energy, environmentally, intelligent, and reliable. Main products include industrial boilers(hot water boilers, steam boilers, thermal oil boilers, waste heat boilers, and CFB boilers), steam generators(electric steam generators, electric hot water generators), intelligent control system by PLC control, PLC+PC control or DCS control, remote instrument and valves, and so on. The control system includes industrial boiler control system(oil fired boilers, gas fired boilers, biomass fired boilers, coal fired boilers, electric boilers, waster heat boilers, CFB boilers), PLC deaerator control system, condensate recovery system, reactor control system, heating exchanger control system, hot air boiler control system etc. The remote instrument and valves include temperature sensors, pressure transmitters, pressure sensors, pressure controllers, liquid level meters, flowmeter, electric control valve, Zirconia, TDS sewage, and so on.
Share your thoughts
Showing
6
of
0
reviews
Most recent
Top Reviews
Read more
Your rating
Your review *
Name *
Enter your Name
Email *
Enter your Email
Upload Image
Notice: Ensure your image is no larger than 200KB before uploading.
Submit
Contact Us Now
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Phone
Products can't be empty
Products you want
Message can't be empty
Verification code error
Clear
People who viewed this item also viewed
